SIMCOM X Voice application
Re: SIMCOM X Voice application
I've made a few tweeks which should help the PTT reverse at least.
Let me know.
Let me know.
-
- Posts: 10
- Joined: Fri Dec 25, 2020 10:14 am
Re: SIMCOM X Voice application
Good!
Ok, I guess the new version is the one I can download, right?
Done and installed it, I'll let you know once tested.
Thank you again!
Ok, I guess the new version is the one I can download, right?
Done and installed it, I'll let you know once tested.
Thank you again!
-
- Posts: 5
- Joined: Sun Jan 03, 2021 4:04 pm
Re: SIMCOM X Voice application
Hello!
We have a copy of SimCom X running on a server, it's not got MSFS installed on it but it's running in host mode and all the ports are forwarded.
Should we be able to connect to it? I have SimConnect installed and the voice says online on the host mode is green.
When I connect a client it also says voice green.
Just wanted to check if there is any requirement for the host to have MSFS running on the same machine it for it to work?
Thanks
Gnome
We have a copy of SimCom X running on a server, it's not got MSFS installed on it but it's running in host mode and all the ports are forwarded.
Should we be able to connect to it? I have SimConnect installed and the voice says online on the host mode is green.
When I connect a client it also says voice green.
Just wanted to check if there is any requirement for the host to have MSFS running on the same machine it for it to work?
Thanks
Gnome
-
- Posts: 10
- Joined: Fri Dec 25, 2020 10:14 am
Re: SIMCOM X Voice application
I've dowloaded the new version and - so far - no more PTT mapped button (on the A-10 HOTAS throttle) reversal.
Also, setting the Auto COM switch in the Config, I can see COM1 and COM2 indicated. I still can't see them if I do not tick this setting.
Thank you!
Re: SIMCOM X Voice application
Thanks for the feedback Denis, it's appreciated.DenisFerrari wrote: ↑Sun Jan 03, 2021 4:30 pm
Also, setting the Auto COM switch in the Config, I can see COM1 and COM2 indicated. I still can't see them if I do not tick this setting.
I'm not sure what you mean by COM1 and COM2 aren't indicated.
The displays should show ---.--- in all boxes after pressing the PWR button.
Does this not happen?
-
- Posts: 10
- Joined: Fri Dec 25, 2020 10:14 am
Re: SIMCOM X Voice application
Correct, the displays indicate ---.--- on both. Shouldn't this indicate the cockpit set freq's ?
They only show cockpit COM1 and COM2 freq's set if I tick the AUTO Comm Switch (or similar voice) in the Config.
Is this correct?
Thank you very much again!
Denis
They only show cockpit COM1 and COM2 freq's set if I tick the AUTO Comm Switch (or similar voice) in the Config.
Is this correct?
Thank you very much again!
Denis
Re: SIMCOM X Voice application
OK, that sounds correct then.
Simcom X can be used without running a flight simulator.
If the Autoswitch is Unticked, a user can input a frequency into the STBY box and the press the switch button (in the middle of the frequency displays) to make it the Active frequency.
Somebody acting as ATC might use it this way for example.
The Autoswitch is only for users who wish to change frequency using their flight sim radio stack.
Full details of what Simcom X should do are on my website.
https://dotdash.space/simcom-x-pilot-client/
I hope that helps.
Simcom X can be used without running a flight simulator.
If the Autoswitch is Unticked, a user can input a frequency into the STBY box and the press the switch button (in the middle of the frequency displays) to make it the Active frequency.
Somebody acting as ATC might use it this way for example.
The Autoswitch is only for users who wish to change frequency using their flight sim radio stack.
Full details of what Simcom X should do are on my website.
https://dotdash.space/simcom-x-pilot-client/
I hope that helps.
-
- Posts: 10
- Joined: Fri Dec 25, 2020 10:14 am
Re: SIMCOM X Voice application
Ah ok then!
I did not try yet to insert a freq in StdBy , without the sim....
Very good then!
Thank you
Denis
I did not try yet to insert a freq in StdBy , without the sim....
Very good then!
Thank you
Denis
Re: SIMCOM X Voice application
2.2.1.14 available now.
I've played with a lot of things, so I hope I've not missed anything.
I've now added a feature that I've called Nearby ATC.
It can be enabled by a tickbox in the config window.
It will also be compatible with the ATC VCCS im still working on.
If a Simcom x user acting as a pilot, flys within 40nm of a SimCom X user acting as an ATC.....
The pilot will hear a beep, will have a message displayed in SimCom X and one in their simulator (although uipc is being picky with messages, so xpuipc users may not have a message in the sim) saying which controller is active and a frequency you can contact them on.
I thought this may be handy by drumming up business for ATC and help to stop pilots accidentally flying through controlled space.
I've played with a lot of things, so I hope I've not missed anything.
I've now added a feature that I've called Nearby ATC.
It can be enabled by a tickbox in the config window.
It will also be compatible with the ATC VCCS im still working on.
If a Simcom x user acting as a pilot, flys within 40nm of a SimCom X user acting as an ATC.....
The pilot will hear a beep, will have a message displayed in SimCom X and one in their simulator (although uipc is being picky with messages, so xpuipc users may not have a message in the sim) saying which controller is active and a frequency you can contact them on.
I thought this may be handy by drumming up business for ATC and help to stop pilots accidentally flying through controlled space.
Re: SIMCOM X Voice application
Hi Gnome,NaughtyGnome wrote: ↑Sun Jan 03, 2021 4:08 pm Hello!
We have a copy of SimCom X running on a server, it's not got MSFS installed on it but it's running in host mode and all the ports are forwarded.
Should we be able to connect to it? I have SimConnect installed and the voice says online on the host mode is green.
When I connect a client it also says voice green.
Just wanted to check if there is any requirement for the host to have MSFS running on the same machine it for it to work?
Thanks
Gnome
Appologies as I've just seen this post.
Running that way is fine.
No sim is needed in order to use SimCom X and it can be used as standalone.
Roo
-
- Posts: 5
- Joined: Sun Jan 03, 2021 4:04 pm
Re: SIMCOM X Voice application
Super Thanks Roo,
I am having some issues getting the system working as a server.
It's clearly a firewall issue, as if I turn off the firewall it works and I can connect to it.
However with the firewall on and a rule passing UDP packets on port 9988 to the SimComX application I cannot connect to the server.
I have noticed there is a SimCom X.exe and a Simcom X Server application as well. Which should have the packets being allowed through?
I've also noticed that there are some other UDP ports in use when checking the Processes and what ports they are using:
Any advice or thoughts?
I am running Windows 2019 Server Standard Edition
I am having some issues getting the system working as a server.
It's clearly a firewall issue, as if I turn off the firewall it works and I can connect to it.
However with the firewall on and a rule passing UDP packets on port 9988 to the SimComX application I cannot connect to the server.
I have noticed there is a SimCom X.exe and a Simcom X Server application as well. Which should have the packets being allowed through?
I've also noticed that there are some other UDP ports in use when checking the Processes and what ports they are using:
Any advice or thoughts?
I am running Windows 2019 Server Standard Edition
Re: SIMCOM X Voice application
Try the below link
https://dotdash.space/scx/firewall.html
I wrote it a while ago, but it should help.
https://dotdash.space/scx/firewall.html
I wrote it a while ago, but it should help.
-
- Posts: 5
- Joined: Sun Jan 03, 2021 4:04 pm
Re: SIMCOM X Voice application
Thanks,
Tried that and it didn't ask again for permission to go through the firewall.
Have re-added manually.
Any other thoughts?
Tried that and it didn't ask again for permission to go through the firewall.
Have re-added manually.
Any other thoughts?
Re: SIMCOM X Voice application
Definitely does sound like a firewall issue if you can connect with the firewall off.
Simcom X should cause windows to ask if you want to add a firewall exception on first run.
If it doesn't ask, could there be a rule still there that you missed?
Have you got another rule enabled that would interfer with the rules you're adding for Simcom X?
Block all UDP connections or another rule for port 9988 for example.
Did you enable the rule for both private and public?
This is a good site which might shed light.
https://www.osradar.com/how-to-open-a-f ... 2019-2016/
Have you forwarded a port on your router or are you using the Upnp option? Just curious.
Only UDP port 9988 is needed to be opened.
What does. netstat -an show?
Simcom X should cause windows to ask if you want to add a firewall exception on first run.
If it doesn't ask, could there be a rule still there that you missed?
Have you got another rule enabled that would interfer with the rules you're adding for Simcom X?
Block all UDP connections or another rule for port 9988 for example.
Did you enable the rule for both private and public?
This is a good site which might shed light.
https://www.osradar.com/how-to-open-a-f ... 2019-2016/
Have you forwarded a port on your router or are you using the Upnp option? Just curious.
Only UDP port 9988 is needed to be opened.
What does. netstat -an show?
-
- Posts: 5
- Joined: Sun Jan 03, 2021 4:04 pm
Re: SIMCOM X Voice application
I've finally got it working, thanks for your help Roo.
There seems to be some NAT going on in a part of the network my server is connected to that I can't control.
Logging exposed the wierdness and now I've modified the rules to allow it.
Thanks again!
There seems to be some NAT going on in a part of the network my server is connected to that I can't control.
Logging exposed the wierdness and now I've modified the rules to allow it.
Thanks again!
Re: SIMCOM X Voice application
Good stuff!
I've just released a new version after I broke it
Enjoy
I've just released a new version after I broke it
Enjoy
-
- Posts: 14
- Joined: Tue Jan 19, 2021 4:11 pm
Re: SIMCOM X Voice application
[.net and ts3client.dll error]
Good day everyone - We have a group of pilots using both joinFS and simComX and want to say a very big thank you to the devs.
About 4 or 5 of us are having constant crashes with simComX and I check the logs and show the following errors messages. We are using simComX in group mode and not using it to control teamSpeak:
[.net runtime]
Application: SIMCOM X.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.AccessViolationException
at TeamSpeak.Sdk.Client.NativeMethods.TryStartConnection(TeamSpeak.Sdk.Client.Connection, System.String, System.String, UInt32, System.String, System.String[], System.String, System.String)
at TeamSpeak.Sdk.Client.Connection.Start(System.String, System.String, UInt32, System.String, System.String[], System.String, System.String)
at SIMCOM_X.Form1.Connect2()
at SIMCOM_X.Form1.COM2_Click(System.Object, System.EventArgs)
at System.Windows.Forms.Control.OnClick(System.EventArgs)
at System.Windows.Forms.Button.OnClick(System.EventArgs)
at System.Windows.Forms.Button.OnMouseUp(System.Windows.Forms.MouseEventArgs)
at System.Windows.Forms.Control.WmMouseUp(System.Windows.Forms.Message ByRef, System.Windows.Forms.MouseButtons, Int32)
at System.Windows.Forms.Control.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.ButtonBase.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.Button.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.Control+ControlNativeWindow.OnMessage(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.Control+ControlNativeWindow.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application.Run(System.Windows.Forms.Form)
at SIMCOM_X.Program.Main()
[ts3client.dll error]
Faulting application name: SIMCOM X.exe, version: 2.2.1.22, time stamp: 0x601b2967
Faulting module name: ts3client.dll, version: 0.0.0.0, time stamp: 0x58b44480
Exception code: 0xc0000005
Fault offset: 0x000170dd
Faulting process id: 0x1354
Faulting application start time: 0x01d701898a5106ef
Faulting application path: C:\Program Files (x86)\Simcomx\SIMCOM X.exe
Faulting module path: C:\Program Files (x86)\Simcomx\windows\win32\ts3client.dll
Report Id: 2f6a7a8d-85e2-4d83-bdd0-cefaea6261d5
Faulting package full name:
Faulting package-relative application ID:
Please let me know if you need further information and I shall be glad to provide.
Kindest regards
Jim
Good day everyone - We have a group of pilots using both joinFS and simComX and want to say a very big thank you to the devs.
About 4 or 5 of us are having constant crashes with simComX and I check the logs and show the following errors messages. We are using simComX in group mode and not using it to control teamSpeak:
[.net runtime]
Application: SIMCOM X.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.AccessViolationException
at TeamSpeak.Sdk.Client.NativeMethods.TryStartConnection(TeamSpeak.Sdk.Client.Connection, System.String, System.String, UInt32, System.String, System.String[], System.String, System.String)
at TeamSpeak.Sdk.Client.Connection.Start(System.String, System.String, UInt32, System.String, System.String[], System.String, System.String)
at SIMCOM_X.Form1.Connect2()
at SIMCOM_X.Form1.COM2_Click(System.Object, System.EventArgs)
at System.Windows.Forms.Control.OnClick(System.EventArgs)
at System.Windows.Forms.Button.OnClick(System.EventArgs)
at System.Windows.Forms.Button.OnMouseUp(System.Windows.Forms.MouseEventArgs)
at System.Windows.Forms.Control.WmMouseUp(System.Windows.Forms.Message ByRef, System.Windows.Forms.MouseButtons, Int32)
at System.Windows.Forms.Control.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.ButtonBase.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.Button.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.Control+ControlNativeWindow.OnMessage(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.Control+ControlNativeWindow.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application.Run(System.Windows.Forms.Form)
at SIMCOM_X.Program.Main()
[ts3client.dll error]
Faulting application name: SIMCOM X.exe, version: 2.2.1.22, time stamp: 0x601b2967
Faulting module name: ts3client.dll, version: 0.0.0.0, time stamp: 0x58b44480
Exception code: 0xc0000005
Fault offset: 0x000170dd
Faulting process id: 0x1354
Faulting application start time: 0x01d701898a5106ef
Faulting application path: C:\Program Files (x86)\Simcomx\SIMCOM X.exe
Faulting module path: C:\Program Files (x86)\Simcomx\windows\win32\ts3client.dll
Report Id: 2f6a7a8d-85e2-4d83-bdd0-cefaea6261d5
Faulting package full name:
Faulting package-relative application ID:
Please let me know if you need further information and I shall be glad to provide.
Kindest regards
Jim
Re: SIMCOM X Voice application
Thanks Jim.
The info you posted was helpful.
Leave it with me and I'll tell Simcom X to stop being silly.
There'll be an update shortly.
The info you posted was helpful.
Leave it with me and I'll tell Simcom X to stop being silly.
There'll be an update shortly.
Re: SIMCOM X Voice application
Sorry Roo your reply made me chuckle, reminded me of the kids.
Re: SIMCOM X Voice application
Glad you liked it.
You couldn't post the Simcom X log too could you Jim?
I could double check things that way.
You couldn't post the Simcom X log too could you Jim?
I could double check things that way.