New ISSUE
New ISSUE
Sorry to be a pain but after hours i give up ... tried to send PM but it is stuck in outbox ?
Below is my log for being able to try to connect via my hotspot on my iphone as I was trying to make sure everyone can see my hub and aircraft.
I can see all when connecting directly within my LAN...
What is happenin is the HUb Lists my session, with 59 planes
but when I go to aircraft it only shows me (my laptop 1 plane), so basically i can nort see any planes from my host machine when using external IP via my hotspot,
Used to workm so I must have done something stupid
OH, when I look at the log for the LAN that works its show "Listing airtcraft...." for the many AI that I am using, as you can see below, that is not occurring when accessing externally
whenever you have time.....
30/04/2019 16:29:33.104 Started version 1.4.34 on port 6112
30/04/2019 16:29:33.381 Connected to simulator
30/04/2019 16:29:33.381 SimConnect 10.0.62615.0
30/04/2019 16:29:33.381 Microsoft Flight Simulator X 10.0.62615.0
30/04/2019 16:29:33.463 Listing aircraft LAPTOP : User=Me, ID=1, Model=Boeing 747-400 Paint8
30/04/2019 16:29:34.112 Starting model scan...
30/04/2019 16:29:34.699 Saving model list
30/04/2019 16:29:34.711 Scan found 540 model(s)
30/04/2019 16:29:34.712 Loading match list
30/04/2019 16:29:34.726 Delisting aircraft LAPTOP : User=Me, Model=Boeing 747-400 Paint8
30/04/2019 16:29:35.420 Listing aircraft LAPTOP : User=Me, ID=1, Model=Boeing 747-400 Paint8
30/04/2019 16:29:38.562 No such host is known
30/04/2019 16:29:42.614 Joining network
30/04/2019 16:29:42.783 Connected to network
30/04/2019 16:29:42.789 Added user 06591 48762 6112
30/04/2019 16:29:42.911 Connection established 06591 48762
30/04/2019 16:29:47.156 Node failed to read message: 3 Unable to read beyond the end of the stream.
30/04/2019 16:30:46.300 Removed user 06591 48762
30/04/2019 16:30:46.300 Leave network
Last edited by fltbuff71 on Tue Apr 30, 2019 4:45 pm, edited 1 time in total.
Below is my log for being able to try to connect via my hotspot on my iphone as I was trying to make sure everyone can see my hub and aircraft.
I can see all when connecting directly within my LAN...
What is happenin is the HUb Lists my session, with 59 planes
but when I go to aircraft it only shows me (my laptop 1 plane), so basically i can nort see any planes from my host machine when using external IP via my hotspot,
Used to workm so I must have done something stupid
OH, when I look at the log for the LAN that works its show "Listing airtcraft...." for the many AI that I am using, as you can see below, that is not occurring when accessing externally
whenever you have time.....
30/04/2019 16:29:33.104 Started version 1.4.34 on port 6112
30/04/2019 16:29:33.381 Connected to simulator
30/04/2019 16:29:33.381 SimConnect 10.0.62615.0
30/04/2019 16:29:33.381 Microsoft Flight Simulator X 10.0.62615.0
30/04/2019 16:29:33.463 Listing aircraft LAPTOP : User=Me, ID=1, Model=Boeing 747-400 Paint8
30/04/2019 16:29:34.112 Starting model scan...
30/04/2019 16:29:34.699 Saving model list
30/04/2019 16:29:34.711 Scan found 540 model(s)
30/04/2019 16:29:34.712 Loading match list
30/04/2019 16:29:34.726 Delisting aircraft LAPTOP : User=Me, Model=Boeing 747-400 Paint8
30/04/2019 16:29:35.420 Listing aircraft LAPTOP : User=Me, ID=1, Model=Boeing 747-400 Paint8
30/04/2019 16:29:38.562 No such host is known
30/04/2019 16:29:42.614 Joining network
30/04/2019 16:29:42.783 Connected to network
30/04/2019 16:29:42.789 Added user 06591 48762 6112
30/04/2019 16:29:42.911 Connection established 06591 48762
30/04/2019 16:29:47.156 Node failed to read message: 3 Unable to read beyond the end of the stream.
30/04/2019 16:30:46.300 Removed user 06591 48762
30/04/2019 16:30:46.300 Leave network
Last edited by fltbuff71 on Tue Apr 30, 2019 4:45 pm, edited 1 time in total.
Last edited by fltbuff71 on Sat May 04, 2019 10:03 am, edited 2 times in total.
Re: New ISSUE
My HUB is MANY AI w/Lightning
Re: New ISSUE followup
OK, 2pc's went back to ver 1.4.10 both machines, still would connect to HUB now...
Hub is there but when I clicked, nothing
So, I disconnected from netword, entered my external IP in the address line and whalah, I amnd good.
When I get back home later today I will re-try with 01.4.34 latest versions....
Hub is there but when I clicked, nothing
So, I disconnected from netword, entered my external IP in the address line and whalah, I amnd good.
When I get back home later today I will re-try with 01.4.34 latest versions....
Re: New ISSUE
Oh well, any help will be appreciated....
Tried with both PC's 01.4.34 and when i tried to connect to external IP, the network went from RED to Yellow, but never to green
???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
Tried with both PC's 01.4.34 and when i tried to connect to external IP, the network went from RED to Yellow, but never to green
???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
Re: New ISSUE
Update
I flipped roles of my desktop and laptop and now works using latest rel of software
so now the laptop is the host desktop is client user
something on my desktop must be different than the laptop, so that is where I will focus my research tomorrow.....
I flipped roles of my desktop and laptop and now works using latest rel of software
so now the laptop is the host desktop is client user
something on my desktop must be different than the laptop, so that is where I will focus my research tomorrow.....
Re: New ISSUE
Sounds like a network issue, ports etc etc.
I noticed the other day that if I wasnt using the same port as others on a hub I connected to, they wouldn't show.
I was connected fine but I wasnt receiving the traffic from the hub I connected to.
I changed my port to what the others were using and I saw everybody.
I'd have a look at that.
Are both JoinFS clients using the same port?
Does your mobile network have that port open when you're testing?
I noticed the other day that if I wasnt using the same port as others on a hub I connected to, they wouldn't show.
I was connected fine but I wasnt receiving the traffic from the hub I connected to.
I changed my port to what the others were using and I saw everybody.
I'd have a look at that.
Are both JoinFS clients using the same port?
Does your mobile network have that port open when you're testing?
Re: New ISSUE
Now, deleted all planes from host, let fsx reinstall them
but still not seeing planes when USING EXTERNAL IP ADDRESS on mt iphone's wifi
CAN ANYONE SEE MY PLANES on HUB "MAJOR Lightning with lots of AI"
users view shows green connected, 328ms ping
but blank nickname and callsign and aicraft = 0 EVEN thought hub view shows 151 planes ???
Aircraft view only shows me, the client with my 1 plane
Very puzzled because if I switch roles of these 2 pc's and change my port forward etc. they work nicely,
'
something is off with host PC, but I have clean re-installed Joinfs, check net versions. simconnects etc, firewall ruiles windows defender rules etc... all seem to be same as laptiop that works if I make it the host, just the deskltop as HOST, no planes
BUT, I see ALL the planes when I am connected on same wifi
but still not seeing planes when USING EXTERNAL IP ADDRESS on mt iphone's wifi
CAN ANYONE SEE MY PLANES on HUB "MAJOR Lightning with lots of AI"
users view shows green connected, 328ms ping
but blank nickname and callsign and aicraft = 0 EVEN thought hub view shows 151 planes ???
Aircraft view only shows me, the client with my 1 plane
Very puzzled because if I switch roles of these 2 pc's and change my port forward etc. they work nicely,
'
something is off with host PC, but I have clean re-installed Joinfs, check net versions. simconnects etc, firewall ruiles windows defender rules etc... all seem to be same as laptiop that works if I make it the host, just the deskltop as HOST, no planes
BUT, I see ALL the planes when I am connected on same wifi
Re: New ISSUE
You may very well be onto something, but I never had to do anything in the past and, it works when I flip roles of PC's using same iphone hotspot, so mmmm
Re: New ISSUE
02/05/2019 11:32:47.603 Connection established 06591 48762
02/05/2019 11:33:39.581 Node failed to read message: 3 Unable to read beyond the end of the stream.
02/05/2019 11:36:25.052 Node failed to read message: 3 Unable to read beyond the end of the stream.
02/05/2019 11:37:20.142 Node failed to read message: 3 Unable to read beyond the end of the stream.
02/05/2019 11:38:15.393 Node failed to read message: 3 Unable to read beyond the end of the stream.
I just noticed this the the laptop pc trying to access hub on desktop
02/05/2019 11:33:39.581 Node failed to read message: 3 Unable to read beyond the end of the stream.
02/05/2019 11:36:25.052 Node failed to read message: 3 Unable to read beyond the end of the stream.
02/05/2019 11:37:20.142 Node failed to read message: 3 Unable to read beyond the end of the stream.
02/05/2019 11:38:15.393 Node failed to read message: 3 Unable to read beyond the end of the stream.
I just noticed this the the laptop pc trying to access hub on desktop
Re: New ISSUE
per Roo, i am going to drill down on port issue
Maybe something on my desktop is blocking port 6112
I do a is port open on 6112 and it says can not find ...
'
Error: I could not see your service on 71.214.159.238 on port (6112)
Reason: Connection timed out
so, I am going to flip PC roles again, change my port forwarding rules for proper ip addr of host PC
then do is port open test, if it shows OPEN at that point using laptop as HOST, then something on Desktop is blocking, I just don't see it in the firewall ruls etc.. yet
Maybe something on my desktop is blocking port 6112
I do a is port open on 6112 and it says can not find ...
'
Error: I could not see your service on 71.214.159.238 on port (6112)
Reason: Connection timed out
so, I am going to flip PC roles again, change my port forwarding rules for proper ip addr of host PC
then do is port open test, if it shows OPEN at that point using laptop as HOST, then something on Desktop is blocking, I just don't see it in the firewall ruls etc.. yet
Last edited by fltbuff71 on Sat May 04, 2019 10:03 am, edited 1 time in total.
Re: New ISSUE
I thought i had run an FSX-SE mult testy using desktop as HOST (uses 6112)
and
i was able to access via laptop using fsx-se multiplayer (not using internal LAN option)
So I am going to regroup, redocument steps, but I will get to the bottom of this...
and
i was able to access via laptop using fsx-se multiplayer (not using internal LAN option)
So I am going to regroup, redocument steps, but I will get to the bottom of this...