P3D V4.4

Report problems with JoinFS.
Post Reply
blb92
Posts: 19
Joined: Thu Dec 06, 2018 2:02 pm

P3D V4.4

Post by blb92 »

Hello, a big bug in P3D v4.4 concerning the mixture, the thruttle lean rapidly and the control surface go down rapidly too without any action on my part . The previous release was good.
Does any one know this probleme ?
Thank's a lot
User avatar
Peter
Site Admin
Posts: 2281
Joined: Fri Sep 23, 2016 8:51 am
Contact:

Re: P3D V4.4

Post by Peter »

Do you mean that this only started happening in P3D v4.4, and 4.3 was ok? I'm still on 4.3 here so I can't test this just yet.

Peter
blb92
Posts: 19
Joined: Thu Dec 06, 2018 2:02 pm

Re: P3D V4.4

Post by blb92 »

Yes , since 4.4, i don't test it whith 4.3 because Joinfs 1.4.14 did not exist before.
I have reloaded the 1.2.10 but but no concentrator is green !
blb92
Posts: 19
Joined: Thu Dec 06, 2018 2:02 pm

Re: P3D V4.4

Post by blb92 »

My Bug with Joinfs V 1.4.18 and P3D V4.4, when I connect Joinfs my engine shut down and the elevator go down

https://youtu.be/tXBShplNFY4
User avatar
Peter
Site Admin
Posts: 2281
Joined: Fri Sep 23, 2016 8:51 am
Contact:

Re: P3D V4.4

Post by Peter »

This is very similar to a previous problem. That looks like an A2A aircraft, is that right? The old problem was mainly with Carenados. Could you confirm at what point the engine shuts down? Is it when you do something, or is it when JoinFS injects other aircraft into the simulator. You can check this either from the aircraft list or from the monitor window which tells you when another aircraft has been added.

Peter
blb92
Posts: 19
Joined: Thu Dec 06, 2018 2:02 pm

Re: P3D V4.4

Post by blb92 »

It does it with all planes, here is the commander 114 carenado but the baron 58 from fsx is the same and Mooney etc..finally all the aircraft, it cuts everything at the time of connection but if I restart the engine, the mixture will go back to zero continuously,13 times at least Tuesday during the flight. I m going to test the P3D connexion.
blb92
Posts: 19
Joined: Thu Dec 06, 2018 2:02 pm

Re: P3D V4.4

Post by blb92 »

Peter wrote:This is very similar to a previous problem. That looks like an A2A aircraft, is that right? The old problem was mainly with Carenados. Could you confirm at what point the engine shuts down? Is it when you do something, or is it when JoinFS injects other aircraft into the simulator. You can check this either from the aircraft list or from the monitor window which tells you when another aircraft has been added.

Peter
I test this at night today , but with the previous versions it did not do it
blb92
Posts: 19
Joined: Thu Dec 06, 2018 2:02 pm

Re: P3D V4.4

Post by blb92 »

I am currently connected to cyberavia and everything is OK, so I think it comes from another singer among my friends
may be a difference of version !!
as much for me, the server Cyberavia is in orange, so I switch to Italiani volanti to see if it remains stable, and it seems to be stable
blb92
Posts: 19
Joined: Thu Dec 06, 2018 2:02 pm

Re: P3D V4.4

Post by blb92 »

I'll see it tonight when we fly
blb92
Posts: 19
Joined: Thu Dec 06, 2018 2:02 pm

Re: P3D V4.4

Post by blb92 »

just twice today since I opened port 6112 and 6122, maybe it's the cause !!!
blb92
Posts: 19
Joined: Thu Dec 06, 2018 2:02 pm

Re: P3D V4.4

Post by blb92 »

brightening the situation, the mixture cuts off as soon as someone connects, whether in HUB or via another server.
User avatar
spokes2112
Posts: 43
Joined: Wed Dec 21, 2016 3:05 am
Location: KGRB

Re: P3D V4.4

Post by spokes2112 »

Post Reply