Page 1 of 1
JoinFS is not opening
Posted: Sat Feb 12, 2022 8:43 pm
by ShyFox666
I have tried a lot, reinstalling, restarting the pc, disable virus defender, download additional simconnect msi thingys. It just wont open.
Re: JoinFS is not opening
Posted: Sat Feb 12, 2022 9:44 pm
by Peter
Could you try the next version 3.2.2? I am going to add something to try and track this particular issue down.
Thanks,
Peter
Re: JoinFS is not opening
Posted: Sat Feb 12, 2022 10:05 pm
by ShyFox666
i cant find other versions than 3.2.1 and 3.1.4 and down. where can i fint the new version?
Re: JoinFS is not opening
Posted: Sat Feb 12, 2022 10:27 pm
by Peter
ShyFox666 wrote: ↑Sat Feb 12, 2022 10:05 pm
i cant find other versions than 3.2.1 and 3.1.4 and down. where can i fint the new version?
It's not available yet. It will be out in the next few days.
Peter
Re: JoinFS is not opening
Posted: Sun Feb 13, 2022 9:46 am
by mutley
Hi Peter,
Same problem here.
I am using Windows 11 Pro, there have been a few updates including 21H2 which I installed, seems like a coincidence?
/Joe
Re: JoinFS is not opening
Posted: Sun Feb 13, 2022 10:39 am
by Peter
mutley wrote: ↑Sun Feb 13, 2022 9:46 am
Hi Peter,
Same problem here.
I am using Windows 11 Pro, there have been a few updates including 21H2 which I installed, seems like a coincidence?
/Joe
Which platform of JoinFS are you installing? Could you try out JoinFS-FSX because that is still on .NET Framework 2.0. Perhaps it is .NET related?
Peter
Re: JoinFS is not opening
Posted: Sun Feb 13, 2022 11:03 am
by Jerichoid
Install a previous version, e.g. 3.1.4, and then the new one. That should help, its a good workarround.
Re: JoinFS is not opening
Posted: Sun Feb 13, 2022 3:43 pm
by mutley
Jerichoid wrote: ↑Sun Feb 13, 2022 11:03 am
Install a previous version, e.g. 3.1.4, and then the new one. That should help, its a good workarround.
Thanks for the tip, I will try.
Re: JoinFS is not opening
Posted: Sun Feb 13, 2022 3:46 pm
by mutley
@Peter,
I tried to install the FSX version and it gave a warning that .NET Framework 2 was required, so I downloaded it from Microsoft and tried again and the FSX version did not run, tried FS2020 again and still dead.
/joe
BTW. I have the same problem on my Win 11 laptop which is on 21H2 as well. :/
Re: JoinFS is not opening
Posted: Sun Feb 13, 2022 3:56 pm
by mutley
Jerichoid wrote: ↑Sun Feb 13, 2022 11:03 am
Install a previous version, e.g. 3.1.4, and then the new one. That should help, its a good workarround.
Yeah that worked. I installed 3.1.4 followed by FS2020 3.2.1 (without uninstalling 3.1.4) and all appears to be running ok.
Thanks for the advice
Re: JoinFS is not opening
Posted: Sun Feb 13, 2022 4:07 pm
by mutley
OK, ditch the above, it ran once and seemed to leave a process running and wouldn't restart thereafter. Very curious.
Re: JoinFS is not opening
Posted: Sun Feb 13, 2022 4:09 pm
by Peter
mutley wrote: ↑Sun Feb 13, 2022 3:46 pm
@Peter,
I tried to install the FSX version and it gave a warning that .NET Framework 2 was required, so I downloaded it from Microsoft and tried again and the FSX version did not run, tried FS2020 again and still dead.
/joe
BTW. I have the same problem on my Win 11 laptop which is on 21H2 as well. :/
Hi Joe,
two separate issues there. I think the FS2020 one I have just fixed so hopefully 3.2.2 will fix that.
To enable .NET Framework 2 you need just need to enable it via the control panel. Instructions are at the top of the manual,
https://joinfs.net/manual.html
Peter
Re: JoinFS is not opening
Posted: Sun Feb 13, 2022 4:11 pm
by Peter
mutley wrote: ↑Sun Feb 13, 2022 4:07 pm
OK, ditch the above, it ran once and seemed to leave a process running and wouldn't restart thereafter. Very curious.
Ok, try 3.2.2 when it comes out. I will force the logs to be enabled in that one so hopefully you can check the AppData\Local\JoinFS log file.
Peter
Re: JoinFS is not opening
Posted: Sun Feb 13, 2022 4:13 pm
by Peter
Jerichoid wrote: ↑Sun Feb 13, 2022 11:03 am
Install a previous version, e.g. 3.1.4, and then the new one. That should help, its a good workarround.
I can't thank you enough for posting this. It has helped to catch a bug that was causing JoinFS to close as soon as it starts for anyone that was installing JoinFS for the first time.
Peter
Re: JoinFS is not opening
Posted: Sun Feb 13, 2022 4:19 pm
by mutley
My final 2 cents.
I have found with the 3.2.1 2020 version it takes approximately 70 seconds for the UI to appear and about 130 seconds (on my laptop) for the UI to become accessible then it seems ok.
Joe
Re: JoinFS is not opening
Posted: Sun Feb 13, 2022 4:44 pm
by Peter
mutley wrote: ↑Sun Feb 13, 2022 4:19 pm
My final 2 cents.
I have found with the 3.2.1 2020 version it takes approximately 70 seconds for the UI to appear and about 130 seconds (on my laptop) for the UI to become accessible then it seems ok.
Joe
That is a bit odd. It should appear immediately. Could you open the monitor window, click Record Logs. Then close JoinFS, restart and while it is waiting to appear keep opening AppData\Local\JoinFS\log-6112.txt to see what messages are appearing during this time.
Peter
Re: JoinFS is not opening
Posted: Sun Feb 13, 2022 4:51 pm
by mutley
Will do
Re: JoinFS is not opening
Posted: Sun Feb 13, 2022 4:58 pm
by mutley
Peter,
This a red herring and my fault
it's looking for the sim which is not on my laptop, I will try on my FS PC.
Thanks,
Joe