Hi,
JoinFS on a virtual W10 System connected direct to the Internet running in HUB-Mode sometimes produce heavy Traffic (30mbit in 15Mbit out) with no connected clients for a few hours. Traffic stops, when I stop JoinFS. Is it a worm or spam relay ?
Achim
Hub Mode traffic without connected clients
Re: Hub Mode traffic without connected clients
It will regularly talk to the other hubs but shouldn't be that much data. I will have a look, might be a bug.
Peter
Peter
Re: Hub Mode traffic without connected clients
JoinFS connects to 152.199.19.161 and 20.199.120.182 with https. Bandwith 15-20 MBit/s
Joining Clients for a Session needs 2-5 Minutes to connect. You can stop JoinFS only via Taskmanager (kill)
Dangerous.....
Screenshot:
Achim
Joining Clients for a Session needs 2-5 Minutes to connect. You can stop JoinFS only via Taskmanager (kill)
Dangerous.....
Screenshot:
Achim
Re: Hub Mode traffic without connected clients
Could you add the -b flag to show which program is using those connections?
JoinFS should only be connecting to 'https://checkip.amazonaws.com/' and some files on joinfs.net when it starts up.
Peter
Re: Hub Mode traffic without connected clients
WpnUserService ??
JoinFS has high Network Traffic (35.7 MBit/s)
Achim
JoinFS has high Network Traffic (35.7 MBit/s)
Achim
Re: Hub Mode traffic without connected clients
Is your machine called 'joinfs' ?
I can't see anything in the netstat output that is actually related to JoinFS.
Are you running in hub mode at all?
Peter
I can't see anything in the netstat output that is actually related to JoinFS.
Are you running in hub mode at all?
Peter
Re: Hub Mode traffic without connected clients
Renamed machine, create new user, create new HUB. Same Problem. ;(
Achim
PS: changed to an other IP Number..... better Maybe it was a DOS-Attack to Port 6112 to my IP.
Achim
Achim
PS: changed to an other IP Number..... better Maybe it was a DOS-Attack to Port 6112 to my IP.
Achim