X-plane 11 question

Suggestions, ideas and general discussion about JoinFS.
Post Reply
dreak
Posts: 3
Joined: Mon Sep 19, 2022 11:01 am

X-plane 11 question

Post by dreak »

Hello,

Im using Xplane11 JoinFS with my friend (also Xplane 11) to make group flight, the question is, we have X-IvAp CSL package installed,but the CSL aircraft never show landing gear, flaps and some lights.

we have both installed X-plane version, I create session, my friend join it, we have both simulator and network/password green. We did scaning for model and substitude to correct model, for example B738 to B738 etc.

but both aircraft (from my side to him and from his side to mine) dont have extended landing gear, the model didnt show flaps, no light simulation. When we start flight, the aircraft movement are correct, we can see each other on TCAS, but visual there is no gear etc.

When Im on VATSIM using the same packages, all the simulation are correct.

could you please help us how to correct to setup these things?

thank you
User avatar
Peter
Site Admin
Posts: 2281
Joined: Fri Sep 23, 2016 8:51 am
Contact:

Re: X-plane 11 question

Post by Peter »

Hi, this has been fixed in v3.2.17, which will be released in about a week's time. Lights, flaps and gear should work in that build, but let me know otherwise.

Peter
dreak
Posts: 3
Joined: Mon Sep 19, 2022 11:01 am

Re: X-plane 11 question

Post by dreak »

Hi, we tried version 3.2.17, landing gear is showing (we didnt flight so I dont know how is working), flaps work, nav lights ok, beacon lights ok, strobe lights not working, taxi light not working, landing lights (on front gear/some aircraft have 2 position, taxi and T/O) showing as landing light, landing light not working. so far we found it.

we will do some test flight this week, we will test all the function and I will let you know.

thank you very much for the update! :)
User avatar
Peter
Site Admin
Posts: 2281
Joined: Fri Sep 23, 2016 8:51 am
Contact:

Re: X-plane 11 question

Post by Peter »

dreak wrote: Tue Sep 20, 2022 9:44 pm Hi, we tried version 3.2.17, landing gear is showing (we didnt flight so I dont know how is working), flaps work, nav lights ok, beacon lights ok, strobe lights not working, taxi light not working, landing lights (on front gear/some aircraft have 2 position, taxi and T/O) showing as landing light, landing light not working. so far we found it.

we will do some test flight this week, we will test all the function and I will let you know.

thank you very much for the update! :)
Thanks. It may be dependent on the actual CSL model that you are using. It could be that some of them don't support all the lights for example. However, I will look into it and see if I have overlooked something.

Peter
dreak
Posts: 3
Joined: Mon Sep 19, 2022 11:01 am

Re: X-plane 11 question

Post by dreak »

Peter wrote: Tue Sep 20, 2022 9:49 pm
dreak wrote: Tue Sep 20, 2022 9:44 pm Hi, we tried version 3.2.17, landing gear is showing (we didnt flight so I dont know how is working), flaps work, nav lights ok, beacon lights ok, strobe lights not working, taxi light not working, landing lights (on front gear/some aircraft have 2 position, taxi and T/O) showing as landing light, landing light not working. so far we found it.

we will do some test flight this week, we will test all the function and I will let you know.

thank you very much for the update! :)
Thanks. It may be dependent on the actual CSL model that you are using. It could be that some of them don't support all the lights for example. However, I will look into it and see if I have overlooked something.

Peter

Hi, we did a test flight and so far we found this information: (test flight was on Xplane 11 and also we tried on Xplane 12b4 on ground, no flight)
the test flight was on two addon aircraft, one is toliss A346, another is hotstart CL650, then we test cessna 172 on the ground

nav light: working fine
beacon light: working fine
strobe light: not working
taxi light: not working
landing light nose: not working (cessna dont have this function)
landing light: on both jet showing as landing light nose, on cessna is showing on, but I cannot tell if is showing as taxi light or landing light because they are both on the left wing
runway turnoff light: not working (cessna dont have this function)
flaps: working fine, showing position of the flaps, which is perfect!
landing gear: working fine, there is no transition between up and down, but this is not a problem, so totally OK!
engines: showing always on

hope this could help. thanks again!
Post Reply