Helicopter rotor P3D V5.2

Report problems with JoinFS.
Post Reply
aeronauta
Posts: 58
Joined: Sun Oct 09, 2016 4:42 am

Helicopter rotor P3D V5.2

Post by aeronauta »

Hi Peter,

I fly mainly helicopters with my friend Alan and both using P3D V5.2 hf1 and now Joinfs 3.0.9 and cannot see the rotors spinning, it happens with the default Robinson Helo or any other, it works OK with fixed wing engines the props spin OK(I see also in fixed wing the prop rpm listed in the monitor).
Had a look at the Monitor logs and except for Simconnect exception 3 and 29 there are no other errors.(we both have this error)
I have installed MS FS Simconnect Client 10.0.61259.0

Any help?? Let me know if you require other info

thank you

Jorge
User avatar
Peter
Site Admin
Posts: 1986
Joined: Fri Sep 23, 2016 8:51 am

Re: Helicopter rotor P3D V5.2

Post by Peter »

Hi Jorge,

It is probably due to the new variable system. Could you right click on the aircraft, select Assign Variables, and let me know which variable files it shows for that aircraft?

Peter
aeronauta
Posts: 58
Joined: Sun Oct 09, 2016 4:42 am

Re: Helicopter rotor P3D V5.2

Post by aeronauta »

Hi Peter , sorry for the delay response,..my Variables show the Bell 206 and the variables files : Rotorcraft.txt

Jorge
User avatar
Peter
Site Admin
Posts: 1986
Joined: Fri Sep 23, 2016 8:51 am

Re: Helicopter rotor P3D V5.2

Post by Peter »

Should be fixed in v3.1.1. I just needed to add SingleTurbine.txt variables to all rotorcraft by default.

Peter
aeronauta
Posts: 58
Joined: Sun Oct 09, 2016 4:42 am

Re: Helicopter rotor P3D V5.2

Post by aeronauta »

Thank you Peter, now all works OK...

Jorge
Post Reply