Page 1 of 1
Not everyone can see my public joinfs hub
Posted: Fri Sep 03, 2021 1:39 pm
by RivuM
Hi,
I am new to this forum so I'm not sure if this question/issue has risen before...
I have started a public hub for my discord group however only a few can see the server, the rest don't see it.
Can anyone direct me on how to fix this?
Thanks.
Re: Not everyone can see my public joinfs hub
Posted: Fri Sep 03, 2021 2:33 pm
by Peter
Hi, did you set up port forwarding on your router on port 6112, 'UDP-only' ?
Peter
Re: Not everyone can see my public joinfs hub
Posted: Fri Sep 03, 2021 3:01 pm
by RivuM
Peter wrote: ↑Fri Sep 03, 2021 2:33 pm
Hi, did you set up port forwarding on your router on port 6112, 'UDP-only' ?
Peter
Yes, It has been port forwarded.
Re: Not everyone can see my public joinfs hub
Posted: Fri Sep 03, 2021 9:15 pm
by Peter
Is it always the same people that can't see the hub?
Can they connect directly to the hub using the IP address or the JoinFS 'Me' address?
Peter
Re: Not everyone can see my public joinfs hub
Posted: Sat Sep 04, 2021 1:25 am
by Travis
I also can not see my own hub(that was working for a couple weeks). Reset it, and still can't. Which also makes no global servers available.
I also caught JoinFS using over 50% CPU usage about a week ago or so. using 3.0.8
Re: Not everyone can see my public joinfs hub
Posted: Sat Sep 04, 2021 8:58 am
by Peter
Travis wrote: ↑Sat Sep 04, 2021 1:25 am
I also can not see my own hub(that was working for a couple weeks). Reset it, and still can't. Which also makes no global servers available.
I also caught JoinFS using over 50% CPU usage about a week ago or so. using 3.0.8
Could you check the monitor window? It should be using 0.5%, not 50%.
Peter
Re: Not everyone can see my public joinfs hub
Posted: Sun Sep 05, 2021 12:39 pm
by RivuM
Peter wrote: ↑Fri Sep 03, 2021 9:15 pm
Is it always the same people that can't see the hub?
Can they connect directly to the hub using the IP address or the JoinFS 'Me' address?
Peter
It seems that most people can't see the server, out of say 10 people only 2 can see it.
Re: Not everyone can see my public joinfs hub
Posted: Sun Sep 05, 2021 2:01 pm
by Peter
RivuM wrote: ↑Sun Sep 05, 2021 12:39 pm
It seems that most people can't see the server, out of say 10 people only 2 can see it.
I think there has been a lingering bug somewhere for quite a while now causing these kind of issues. I'll see if I can track it down.
Do you know if any of them can join the hub directly by entering the public IP address in the join box on the main JoinFS window?
Peter
Re: Not everyone can see my public joinfs hub
Posted: Sun Sep 05, 2021 3:52 pm
by RivuM
Peter wrote: ↑Sun Sep 05, 2021 2:01 pm
RivuM wrote: ↑Sun Sep 05, 2021 12:39 pm
It seems that most people can't see the server, out of say 10 people only 2 can see it.
I think there has been a lingering bug somewhere for quite a while now causing these kind of issues. I'll see if I can track it down.
Do you know if any of them can join the hub directly by entering the public IP address in the join box on the main JoinFS window?
Peter
It seems people can join via public IP
Re: Not everyone can see my public joinfs hub
Posted: Sun Sep 05, 2021 5:32 pm
by Peter
RivuM wrote: ↑Sun Sep 05, 2021 3:52 pm
It seems people can join via public IP
Great, that's useful to know, thanks.
Peter
Re: Not everyone can see my public joinfs hub
Posted: Tue Sep 07, 2021 5:31 pm
by Travis
Still going up to 50% turning off for now.
Re: Not everyone can see my public joinfs hub
Posted: Tue Sep 07, 2021 6:56 pm
by Peter
Travis wrote: ↑Tue Sep 07, 2021 5:31 pm
Still going up to 50% turning off for now.
Does it go to 50% immediately? If not, how long does it take to go up?
Peter
Re: Not everyone can see my public joinfs hub
Posted: Thu Sep 09, 2021 3:38 am
by Travis
No it is not immediately, not sure but probably a day or 2.